Managing Smart Screen Issues with Sky Q and Flipper Sky Q typically uses code 3734. However, some Sky Q boxes may automatically power on a smart screen. Here are possible solutions: 1) Keep Sky Q On Permanently (Recommended) In Flipper, modify settings: Press and hold ADD until the light is solid. Enter 999. This ensures the On/Off button only controls the TV, while Sky Q stays on. Important: Disable or extend standby mode in the Sky Q settings. 2) Adjust Sky Q Settings Look for an option to disable this behavior in the Sky Q menu. Many users have reported this issue—consider calling Sky Q support for assistance. 3) Disconnect WiFi Based on reports, the smart screen issue only occurs when Sky Q is connected to WiFi. Try disconnecting the WiFi and see if the issue resolves. 4) Use Flipper’s Learning Mode Copy the Exit signal from Sky Q into Flipper’s Mute button. This can serve as a quick workaround to dismiss the smart screen.