Quick setup

(1) Set TV:  press VOL.  If working, go to STB.  If not, then:  press and hold TV til the light turns solid, then enter the 4 digit code (test on/off and VOL);

        (a) If you do not have a STB / Cable box, then: press and hold TV till solid, enter 970.

(2) Set STB:  press CH.  If working, you are done.  If not, then: press and hold STB til the light turns solid, then enter the 4 digit code (test on/off and CH);

(3) Favorites: (if desired).  Go to Manualand see "Favorites"

Troubleshooting:

If the red light does not work as expected, then reset as follows:

(1) Press and hold ADD till solid, then enter 956, light blinks out;  Repeat with STB and TV buttons;

(2) Reset: press and hold ADD till solid, then enter 954, light blinks out.  The sync, above.

Telephone support is available, but please use the online resources and email first.  We respond promptly!